制造业APS作用是什么?

随着疫情结束,企业的产能渐渐走向复苏,制造业APS系统渐渐走入制造业企业家的视角,小编整理了一份APS的资料,从APS的诞生到现在APS的困难与挑战,带大家了解制造业APS系统是什么?

随着疫情结束,企业的产能渐渐走向复苏,制造业APS系统渐渐走入制造业企业家的视角,小编整理了一份APS的资料,从APS的诞生到现在APS的困难与挑战,带大家了解制造业APS系统是什么?

APS是什么?制造业APS的起源

制造业APS是什么?制造业APS困难与挑战

随着矛盾的凸显,美国生产与库存控制协会(APICS)于1975年开始进行工厂计划与管理方面的研究,终于在20世纪60年代计算机商业化应用后,物料需求计划系统(MRP)面世。从此在工厂计划领域开始了从MRP到MRPII再到企业资源计划(ERP)的演进过程。随着制造业进入个性化量产阶段,人们意识到MRP、MRPII、ERP一直存在两大缺陷,一是无限产能逻辑下的计划可执行性低,二是无法给出日常的细粒度生产排程。后者已经越来越被发现是制造业降本增效的一大瓶颈。

直到20世纪90年代,随着管理理论和计算机技术的发展,高级生产计划与排程系统(APS)诞生,可根据既定的生产目标,在物料和产能约束下给出对各种生产资源和供需规划的同步决策,填补了MRP和ERP在精益化决策能力上的不足。

APS的现状是什么?常态下制造业APS的挑战

制造业APS是什么?制造业APS困难与挑战

APS不仅集成了MRP的物料计划功能,还拥有了更强大的生产决策规划能力。不但可以同步考虑物料、产能、人员、运输、财务等资源约束,而且可以根据供求情况,对生产的长期规划和短期排程给出一致性的优化决策。但制造业发展到今天,小批量多批次柔性生产已经成为新常态,不断优化的生产流程和创新技术,使得APS在功能架构和决策能力上面临众多新挑战。

1.制造业APS系统挑战一:更多约束条件的考虑

制造业APS是什么?制造业APS困难与挑战

制造业进入了个性化量产阶段,差异化服务能力直接影响企业的竞争力,制造业通常根据客户定制需求设计一些基本产品类型,甚至大量生产唯一定制的产品。在生产计划时要充分考虑工治具等生产约束条件,快速输出可行的排程方案。同时还要处理工厂内外可能出现的不确定性和各种异常扰动,并敏捷、动态的恢复计划与调度的可行性。

2.制造业APS系统挑战二:场景适应性优化

制造业APS是什么?制造业APS困难与挑战

随着新冠疫情全球蔓延,国际供需形势变幻莫测,对于制造业来说也加剧了生产的不确定性,这需要APS系统能根据生产状况最大限度的对多个生产目标进行动态优化。在供不应求的情况下,最大化生产效率;在需求紧缩的情况下,尽量节约生产成本;在库存高的阶段,将库存水位优化作为核心目标。实现灵活配置,灵活调整。

3.制造业APS挑战三:快速部署的挑战

制造业APS是什么?制造业APS困难与挑战

随着工业化步伐的不断前进,制造业生产经营管理模式也发生着翻天覆地的变化,传统的单一工厂独自经营的生产模式已不能适应日新月异的市场发展趋势。订单的爆发,新生产线的投产,快速建设、启动新厂区会成为制造业随时可能会被提上日程的规划。传统APS部署难,落地慢这一老大难问题成为企业业务拓展的障碍。

面对以上挑战,传统APS规则僵化、无法处理复杂生产约束、落地部署难等问题凸显,催生着APS向着更强大的一代进化。

翻译

With the end of the epidemic, the production capacity of enterprises is gradually recovering, and the manufacturing APS system is gradually entering the perspective of manufacturing entrepreneurs. Xiaobian has compiled an APS information, from the birth of APS to the present difficulties and challenges of APS, to take you to understand what is the manufacturing APS system

What is APS? The origin of manufacturing APS

What is the manufacturing APS? Manufacturing APS difficulties and challenges

As the conflict became apparent, the American Production and Inventory Control Institute (APICS) began a study of plant planning and management in 1975. Finally, in the 1960s, computers were commercialized and the Material Requirements Planning System (MRP) was introduced. This is the beginning of the evolution from MRP to MRPII to enterprise resource planning (ERP) in the field of plant planning. As the manufacturing industry enters the stage of personalized mass production, people realize that MRP, MRPII and ERP have always had two major defects. One is that the plan execution is low under the logic of infinite production capacity; the other is that the daily fine-grained production schedule cannot be given. The latter has increasingly been found to be a bottleneck in manufacturing efficiency.

Until the 1990s, with the development of management theory and computer technology, advanced production planning and scheduling system (APS) came into being, which can make synchronous decision on various production resources and supply and demand planning under the constraints of material and capacity according to the established production targets, filling the shortage of lean decision-making ability of MRP and ERP.

What is the current status of APS? The challenge of manufacturing APS under normal conditions

What is the manufacturing APS? Manufacturing APS difficulties and challenges

APS not only integrates the material planning functions of MRP, but also has more powerful production decision planning capabilities. Not only can resource constraints such as material, capacity, personnel, transportation and finance be considered simultaneously, but also consistent optimization decisions can be made on long-term planning and short-term scheduling of production according to supply and demand. However, with the development of the manufacturing industry today, small-batch and multi-batch flexible production has become the new normal. Continuous optimization of production process and innovative technology make APS face many new challenges in functional architecture and decision-making ability.

1. Manufacturing APS system Challenge I: Consideration of more constraints

What is the manufacturing APS? Manufacturing APS difficulties and challenges

The manufacturing industry has entered the stage of personalized mass production, and the differentiated service ability directly affects the competitiveness of enterprises. The manufacturing industry usually designs some basic product types according to the customized needs of customers, and even mass-produces only customized products. In the production planning to fully consider the production constraints such as fixture, quickly output feasible scheduling scheme. At the same time, it is also necessary to deal with the uncertainties and various abnormal disturbances that may occur inside and outside the plant, as well as the feasibility of agile and dynamic recovery planning and scheduling.

2. Manufacturing APS system Challenge II: Scenario adaptability optimization

What is the manufacturing APS? Manufacturing APS difficulties and challenges

With the global spread of COVID-19, the international supply and demand situation is unpredictable, which also intensifies the production uncertainty for the manufacturing industry, which requires the APS system to maximize the dynamic optimization of multiple production targets according to the production situation. Maximize production efficiency when demand exceeds supply; In the face of tight demand, try to save production costs; In the stage of high inventory, the optimization of inventory water level is regarded as the core objective. Achieve flexible configuration, flexible adjustment.

3. Manufacturing APS Challenge 3: Rapid deployment Challenge

What is the manufacturing APS? Manufacturing APS difficulties and challenges

With the continuous progress of industrialization, the production and management mode of manufacturing industry is also undergoing tremendous changes. The traditional production mode of single factory operating alone can no longer adapt to the changing trend of market development. A burst of orders, the opening of new production lines, and the rapid construction and start-up of new plants are all things that can be put on the manufacturing agenda at any time. The traditional APS deployment is difficult and the implementation is slow, which has become an obstacle for enterprises to expand their business.

In the face of the above challenges, traditional APS rules are rigid, unable to deal with complex production constraints, difficult deployment and other problems become prominent, which has led to the evolution of APS towards a more powerful generation.

💬 评论
🔗 本文链接

以专业为基,引领科技向善向新

Rooted in professionalism, we lead technology toward social good and innovation.

数智化转型网 · 了解更多产业资讯与选型数据 →

📰 你可能也喜欢

澳柯玛出海启示录:从青岛"电冰柜大王"到印尼三宝垄3.6亿元工厂,30.39%海外占比+63%自有品牌的中国传统家电"破壁出海"方法论 案例库

澳柯玛出海启示录:从青岛”电冰柜大王”到印尼三宝垄3.6亿元工厂,30.39%海外占比+63%自有品牌的中国传统家电”破壁出海”方法论

2025年5月12日晚,澳柯玛(600336.SH)发布公告:拟在印度尼西亚三宝垄市肯德尔工业园投资3.6亿元人民币,建设年产50万台冰箱(柜)的智能制造工厂;
📅 09-24 · 👁 2026年9月24日
宁德时代:从1座德国工厂到欧洲43%市占率,"四厂齐发"的中国动力电池远征 案例库

宁德时代:从1座德国工厂到欧洲43%市占率,”四厂齐发”的中国动力电池远征

当多数中国制造企业还在用「出口创汇」衡量出海成色时,宁德时代已经交出了一份「海外动力电池市占率30%、匈牙利+西班牙+印尼+美国四厂齐发」的全球化答卷。
📅 09-24 · 👁 2026年9月24日
人工智能案例集|丰田 Toyota:AI驱动的自动驾驶与智能制造双引擎转型——数智化转型网www.szhzxw.cn 专题栏目

丰田 Toyota:AI驱动的自动驾驶与智能制造双引擎转型

丰田(Toyota Motor Corporation)作为全球年销量近千万辆的汽车制造商,正以"Woven by Toyota"与"Toyota AI Pla…
📅 08-31 · 👁 2026年8月31日
人工智能案例|索尼:PlayStation AI 助手 + Intelligent Vision Sensor 的非纯 AI 传统巨头 AI 化样本——数智化转型网www.szhzxw.cn 专题栏目

索尼:PlayStation AI 助手 + Intelligent Vision Sensor 的非纯 AI 传统巨头 AI 化样本

索尼:PlayStation AI 助手 + Intelligent Vision Sensor 的非纯 AI 传统巨头 AI 化样本
📅 08-26 · 👁 2026年8月26日
企业出海案例|潍柴动力从潍坊柴油机厂到全球动力帝国,海外营收占比50%+、10家海外子公司全部盈利的链式出海方法论——数智化转型网www.szhzxw.cn 专题栏目

潍柴动力从潍坊柴油机厂到全球动力帝国,海外营收占比50%+、10家海外子公司全部盈利的链式出海方法论

从山东潍坊一家濒临破产的柴油机厂,到全球7家上市公司、10只股票、10万员工、年营收超3000亿元的跨国动力帝国;从单一发动机出口,到拥有10家海外子公司、8大…
📅 08-26 · 👁 2026年8月26日
人工智能案例|中海油:CNOOC AI 大模型 + 智能海上平台 3.0 的海上油气 AI 化旗舰——数智化转型网www.szhzxw.cn 专题栏目

中海油:CNOOC AI 大模型 + 智能海上平台 3.0 的海上油气 AI 化旗舰

作为中国最大的海上油气生产企业、全球第三大石油公司,中海油(CNOOC,600938.SH;0883.HK)正在以「AI+智能勘探+智能钻井+智能油田+智慧能源…
📅 08-26 · 👁 2026年8月26日